We Our solution range contains all kinds of helical equipment, spur equipment, bevel equipment, gear rack, worm gear, sprockets,chains, bearings, pto shaft, agricultural gearboxes.- EPG Group the most significant agricultural gearbox and pto factory in China with 5 different branches. For much more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
Product Description:
60 hp China company 60hp four wheel drive farming 4×4 tractors for agriculture
This model 60hp four wheel drive tractor sells very ept for its excellent top quality and low cost cost.
We export this design tractors most to Europe, The usa, Australia and Brizil and other international locations, they are really popular in the market.
With lovely look, this tractor is also multi-practical. It can match all sorts of farming implements.
Photos:
Common Equipments:
QC4102 Engine,4 Cylinders,12+twelve Gear Shift,With Twin-Stage Clutch,Electricity Steering,Trailer outlet,
protection plate,Tires:8.3-twenty/twelve.4-28,hand throttle wire ,4×4 Wheel Generate,3-Position Linkage,
Rear PTO 540/760, Shade follow your need.
Choices:
Cab,Canopy,Multi-Way Valve,Air Brake,Front Ballast,Rear Ballast,Tilting Attract Bar,
60hp 4wd Tractor Specs
| Product | CP604 | ||||
| Dimensions of Tractor(mm) | Length | 3900 | |||
| Width | 1800 | ||||
| Height (to the exhaust vent) | 2160 | ||||
| Tread | Front Wheel | 1300 | |||
| Rear Wheel | 1300 | ||||
| Axle Foundation | 1760 | ||||
| Min.Floor Clearance | 360 | ||||
| Structure fat (kg) | 2580Kg | ||||
| Engine | Model | QC4102 | |||
| Type | Vertical,4-Cylinder,Water Cooled and 4-stroke | ||||
| Rated Power(kw) | 44.4 | ||||
| Rated velocity (r/min) | 2400 | ||||
| Fuel | Diesel | ||||
| Tires | Front Wheel | 8.3-20 | |||
| Rear Wheel | 12.4-28 | ||||
| Clutch | Dual-phase clutch | ||||
| Steering | Hydraulic steering | ||||
| Transmission Sort | 12+12 shift | ||||
| Suspension Type | 3-point links | ||||
| PTO | Type and Rev | Semi-impartial Type 720r/m or 540/720r/m | |||
| Spline Measurement | I38 Rectangle Spline with 8 teeth | ||||
TZ-8 Entrance Conclude Loader with 4 – in – 1 Bucket Technical specs:
| Design | TZ-8 |
| Bucket capacity(m3) | .43 |
| Rated Load(Kg) | 360 |
| General proportions(mm) | 4900×1740×1296 |
| Max. dump height(mm) | 2200 |
| Max. dump length(mm) | 960 |
| Bucket rollback angle (degree) | forty two |
| Max. unloading angle (diploma) | 46 |
| Max. scraping depth(mm) | a hundred and sixty |
| Lifting time to pivot pin(s) | 8 |
| Descending time(s) | four |
| Recommended Tractor(hp) | 50-70 |
LW-8 Backhoe Specs:
| Model | LW-eight |
| Bucket Ability(mthree) | .048 |
| Bucket Wide(mm) | 450 |
| Max.digging depth(mm) | 2640 |
| Max.digging Radius(mm) | 3930 |
| Max.digging Height(mm) | 3510 |
| Discharging Top(mm) | 2000 |
| Max.digging depth(2ft) Flat base(mm) | 2500 |
| Swing Angle(degree) | 140° |
| Bucket Rotation(diploma) | 160° |
| Dipper adhere Digging Pressure(Kg) | one thousand |
| Working strain(Mpa) | 16 |
Packaging & Shipping:
-3 models inside 1×40’fcl assembled,
-Delivery time: thirty times after obtaining your deposit
Company Information:
Our provider:
Certifications:
FAQ:
The use of first gear manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only a one thousand rpm to 540 rpm reducer Buenos Aires Argentina nd for indicating merchandise use and compatibility. Our company and the shown substitution areas contained herein are not sponsored, authorized, or manufactured by the OEM.
