Solution Description
HSZ-V CZPT Elevate .5-fifty Tons Hefty Duty Handbook Chain Hosit with Hook
Merchandise Description
Chain Block is ideal for little equipment and merchandise of limited length lifting, lifting excess weight is generally not more than 50T. The content of the hand gourd is high quality alloy steel, strong dress in resistance, substantial protection overall performance.
The HSZ sequence chain block is a moveable lifting device effortlessly operated by hand chain, it is relevant for use in manufacturing facility, mines, farms, building internet sites, wharves, docks and warehouses for set up of equipment, as effectively as for loading and unloading merchandise. It is have special advantage for lifting operate in open up air grounds and places the place no electric electricity supply is available.
The chain block can be hooked up to a trolley of any sort as traveling chain block. It is ideal to monorail overhead conveying program, hand touring crane and jib cranes.
Solution Characteristic:
1. Small dimensions, light fat and simple to carry
2. All steel design-affect resistant handles that provide durability and security.
three. CZPT curling design-this attribute enables the hand chain to efficiently feed directlyinto the wheel sprocket from many directions and angles.
four. Grade 80 load chain-quality eighty black oxide coated load chain for toughness.
five. Forged alloy steel hooks- industrial rated hooks rotate 360 degrees for effortless rigging.Hooks slowly and gradually stretch to indicate an overload scenario increasing jobsite basic safety.
6. Sealed roller bearings-significantly improving efficiency and serve life of the product.
7. Certification-load tested to a hundred and fifty% of capacity with certificate.
eight. Steady rotation, mild hand pulling power
9. Double pawl
10. With CE approved
eleven. The overhead trolley is optional
Item Parameters
HSZ | ||||||||
Model | HSZ-.5 | HSZ-1 | HSZ-1.five | HSZ-two | HSZ-three | HSZ-5 | HSZ-ten | HSZ-twenty |
Ability(t) | .five | one | 1.five | two | 3 | five | 10 | twenty |
Normal elevate(m) | two.5 | two.five | 2.5 | 2.five | 3 | 3 | 3 | three |
Energy essential to lift max.load | a hundred and seventy | 340 | 390 | 340 | 390 | 420 | 420 | 420×2 |
No.of columns of load chain | 1 | one | 1 | 2 | two | two | 4 | eight |
Load chain dia.(mm) | six | 6 | eight | 6 | 8 | 10 | ten | ten |
Web fat(kg) | nine.five | nine.five | fifteen | 12.five | 22.five | 36 | sixty eight | a hundred and fifty |
Further excess weight for every meter of additional raise(kg) | 1.seven | 1.7 | two.3 | two.5 | three.7 | 5.three | nine.seven | 19.four |
HSZ-A | ||||||||||
Model | HSZ-.5A | HSZ-1A | HSZ-1.5A | HSZ-2A | HSZ-3A | HSZ-5A | HSZ-10A | HSZ-20A | HSZ-30A | HSZ-50A |
Potential(t) | .5 | 1 | one.5 | 2 | 3 | 5 | 10 | twenty | 30 | 50 |
Regular carry(m) | two.five | 2.5 | 2.five | two.five | 3 | three | three | three | three | three |
Work necessary to raise max.load | 231 | 309 | 320 | 360 | 340 | 414 | 414 | 414×2 | 414×2 | 414×2 |
No.of columns of load chain | one | one | one | two | 2 | 2 | four | eight | twelve | 22 |
Load chain dia.(mm) | five | six.3 | seven | eight | 7 | 9 | nine | nine | 9 | nine |
Web bodyweight(kg) | ten | 12 | 18.5 | twenty | 27 | forty five.five | 83 | 193 | 220 | 1092 |
Additional fat per meter of further lift(kg) | 1.seven | 1.seven | 2.three | 2.three | three.7 | 5.six | 9.seven | 19.four | 26.4 | forty eight.4 |
HSZ-B | ||||||||
Design | HSZ-.5B | HSZ-1B | HSZ-1.5B | HSZ-2B | HSZ-3B | HSZ-5B | HSZ-10B | HSZ-20B |
Capability(t) | .five | 1 | one.5 | 2 | three | 5 | ten | 20 |
Regular raise(m) | two.five | 2.five | 2.five | two.five | three | 3 | three | three |
Effort necessary to elevate max.load | one hundred seventy | 340 | 390 | 340 | 390 | 420 | 420 | 420×2 |
No.of columns of load chain | 1 | 1 | 1 | 2 | 2 | two | 4 | 8 |
Load chain dia.(mm) | six | six | 8 | 6 | eight | ten | 10 | 10 |
Net bodyweight(kg) | nine.5 | nine.5 | fifteen | 12.five | 22.5 | 36 | sixty eight | one hundred fifty |
Further weight for every meter of extra elevate(kg) | one.7 | one.7 | two.3 | two.five | three.seven | 5.3 | nine.seven | 19.4 |
HSZ-V | ||||||||||
Product | HSZ-.5V | HSZ-1V | HSZ-1.5V | HSZ-2V | HSZ-3V | HSZ-5V | HSZ-10V | HSZ-20V | HSZ-30V | HSZ-50V |
Capability(t) | .five | 1 | 1.five | two | three | 5 | ten | twenty | 30 | fifty |
Common elevate(m) | 2.5 | 2.five | 2.five | 2.five | 3 | 3 | three | 3 | three | 3 |
Effort essential to elevate max.load | 231 | 309 | 320 | 360 | 340 | 414 | 414 | 414×2 | 414×2 | 414×2 |
No.of columns of load chain | one | 1 | one | two | 2 | two | 4 | 8 | 12 | 22 |
Load chain dia.(mm) | six | 6 | 8 | 8 | 8 | ten | ten | ten | 10 | 10 |
Internet bodyweight(kg) | 10 | 12 | eighteen.five | twenty | 27 | 45.5 | eighty three | 193 | 220 | 1092 |
Additional excess weight per meter of further lift(kg) | 1.7 | 1.seven | 2.three | 2.three | three.seven | 5.6 | 9.7 | 19.4 | 26.four | forty eight.4 |
HSZ-K | |||||||||
Model | HSZ-K | ||||||||
Capacity | T | .5 | one | one.five | two | three | five | ten | |
Standard carry | M | 2.5 | 2.5 | 2.5 | three | three | three | 3 | |
Running examination | T | .seventy five | 1.5 | two.twenty five | 3 | 4.5 | 7.5 | 15 | |
Effort needed to lift max.load | N | 240 | 250 | 265 | 335 | 363 | 360 | 380 | |
No.of FALLS of load chain | 1 | one | 1 | one | 1 | two | 4 | ||
Load chain dia.(mm) | mm | five | 6 | seven.1 | 8 | ten | 9 | 9 | |
Dimensions | A | mm | 132 | 151 | 173 | a hundred seventy five | 176 | 189 | 189 |
B | mm | 148 | 172 | 196 | 210 | 230 | 280 | 463 | |
C | mm | 28 | 32 | 36 | 36 | forty six | forty six | fifty seven | |
H | mm | 354 | 376 | 442 | 470 | 565 | 688 | 765 | |
Net fat(kg) | kg | eleven | twelve.five | seventeen.8 | 19.five | 29 | forty one.3 | seventy eight.five | |
Packing(LxWxH) | mm | 240x190x180 | 280x210x210 | 340x260x200 | 340x260x200 | 340x260x200 | 410x320x240 | 480x420x185 |
HSZ-M | |||
Model | HSZ-M0.25T | HSZ-M0.5T | |
Rated load(t) | .twenty five | .5 | |
Standard carry top(m) | two.5 | two.five | |
Hand-pull to raise(N) | one hundred twenty | 120 | |
Test load(kg) | 375 | 375 | |
Size(N) | 4×12 | 4×120 | |
N.W(kg) | three.3 | 4 | |
G.W(kg) | three.5 | four.1 | |
Extra fat for one particular meter chain added(kg/m) | .341 | .341 | |
Dimensions(mm) | A | ninety six | ninety six |
B | a hundred and five | one hundred ten | |
C | 25 | 25 | |
Hmin | 268 | 268 | |
E | 104 | 104 |
Comparable Items
High quality Management Method
FAQ
Q1: Are you a manufacturing facility or a investing business?
A1:We are a mixture of equally, we concentrated on manufacturing content dealing with item such as lift tables, guide & electric pallet vans and lifting platforms in excess of 35 years, we also exporting manual & electric powered chain hoist, lever hoisting, lifting clamp and steel jack. We are your ideal selection for one particular cease buy with our contend line of industrial lifting/shifting tools
Q2: Can CZPT lift give personalized merchandise? OEM goods or ODM goods?
A2: Sure, CZPT carry can give customized merchandise according to your need. The two OEM and ODM are acceptable.
Q3: Can we print the Logo on merchandise?
A3: Of course, the OEM is offered with the permission of our clients.
Q4: How do you control your quality?
A4: 1. We only select higher-quality steel material from CZPT metal team
two. Standardized creation method with traceable ID Card, every single portion can be tracked to the unique documents.
3. one hundred% concluded item testing ahead of shipping.
four. We accept third party solution inspections.
five. ISO9001 High quality management technique certificated factory
six. Supervised container loading process, makes certain the very last stage protection
Q5: How prolonged is the guarantee on your goods?
A5: We offer twelve months guarantee for all of our product, excluding put on components such as wheels, tire or hydraulic oil
Q6: What is the guide time for production?
A6: Normally around ten-15 days right after payment gained, all around 30 times for the duration of new year’s or national holiday seasons.
Q7: What Payment phrases do you accept?
A7: T/T or L/C, if you want any other technique you should speak to income
Q8: What are your advantages when compared to the others?
A8:
- CZPT items, with customized service.
- Well timed creation and shipping, time is funds.
- Market place safety service, long term company technique.
ep has a broad selection of pulleys in stock and ready to ship. All spare pulleys are made of higher-grade aluminum and have pilot holes as common. Flanges are produced of steel zinc sheet if necessary, but you can specify other resources by customized order. Inventory aluminum pulleys are accessible in imperial and metric pitches. We can modify inventory pulleys in accordance to your specifications. You can get in touch with buyer support for pricing and delivery.